Independent · Multi-brand
Northeast Florida
Mon–Fri 8–6 · Sat 9–4
The Beaches are the only part of our service area where the same appliance is attacked from outside as well as inside: 32250, 32233 and 32266 sit in a band where airborne chloride is a daily load, and many of these houses stand closed and unoccupied for weeks at a stretch.
First checks at an address here
Fasteners, hinges and door square
Chloride makes a galvanic cell wherever two metals meet. Seized hinge pins and rounded screw heads come before the sealing problem they cause.
Condenser fin stack condition
Aluminium fins corrode as well as clog out here, so the stack loses surface area permanently and the unit runs longer for less output.
Stainless surfaces at handles and seams
Chloride attacks the passive oxide layer in local spots, so the damage reads as pitting and rust bloom rather than the even dulling people expect.
How long the house has stood closed
An unoccupied house with the air conditioning set high is a humid house, and appliances left standing full and unused develop their own set of faults.
What happened at the last restoration
The Beaches are exposed and lose power early. Boards and interfaces damaged by the transient at re-energisation are the most common post-storm call here.
That order is not a script. It is where the odds sit at an address in this area, and a technician who finds the cause in the second step stops there rather than working down the rest of the list.
The Beaches look like a single place from the outside, and for appliance work the resemblance mostly holds: Jacksonville Beach, Neptune Beach and Atlantic Beach all sit in the band where airborne chloride is a continuous load rather than an occasional event.
It is not a storm phenomenon. It is every day, on every surface with a view of the sky, and rain does not remove it — rain dissolves deposited salt and carries it into seams and fasteners where it stays. That single fact drives most of what we are called out to here, and it is why the maintenance advice at the Beaches is different from the advice five miles inland.
Fasteners and hinges. Two dissimilar metals in contact with a chloride electrolyte make a galvanic cell. Hinge pins seize, screw heads round out, and a refrigerator or oven door that has to be forced ends up out of alignment. In this climate a misaligned refrigerator door is not cosmetic — it is a gasket that no longer seals evenly, condensation at the seam, mould in the gasket folds and a defrost system falling behind.
Stainless pitting. Stainless resists corrosion because of a thin passive oxide layer, and chloride is specifically effective at breaking that layer down in localised spots. The result is pitting and rust bloom, not the even dulling people expect. Panel-ready and stainless fronts on ocean-facing kitchens show it first at handles, seams and screw heads.
Condenser fins. Aluminium fin stacks corrode, the stack loses surface area, heat rejection falls, and a refrigerator or ice machine runs longer for less output. On outdoor kitchens and in garages at South Jacksonville Beach and Isle of Palms this is the single most common cause of a unit that “just isn’t as cold as it used to be” — and unlike a dirty condenser, corroded fins do not come back with a clean.
A monthly fresh-water rinse of exposed stainless and of condenser fin stacks is the highest-value maintenance available here, and it costs nothing but time.
Two things about beach housing change the work as much as the salt does.
The first is occupancy. A good number of these houses are second homes or rentals that stand closed for weeks at a time, often with the air conditioning set high to save power. That leaves a warm, still, humid interior, which is exactly the condition in which a refrigerator gasket grows mould in its folds and a dishwasher left with a wet sump develops a smell that no cycle clears. An ice machine left running in an empty house keeps making and re-melting ice all week for nobody. Where a property is routinely left, the useful habit is to empty and dry the water-holding appliances and leave their doors ajar rather than to leave everything running.
The second is size. The older beach cottages have small kitchens with narrow runs and shallow depths, and a modern built-in is deeper and heavier than what the opening was cut for. Getting a column through a beach-house door, along a hall and into place is a planning problem before it is a technical one, and where replacement is the honest answer, the opening decides what fits. We measure during the diagnostic rather than after an order.
The Beaches are exposed. Matthew took power from nearly 250,000 metro customers in October 2016, Irma produced the worst Jacksonville flooding in nearly a century in September 2017, and Helene took 113,000 JEA customers off the grid in September 2024.
In every case the appliance calls that followed were about equipment that came back wrong rather than equipment that went warm. Control boards, inverter compressor drives and user interfaces are damaged by the voltage transient when a whole area is re-energised at once. Open the breaker on built-in refrigeration once the power has already failed, and restore it manually twenty minutes after the street is stable.
Scheduled appointments Monday to Friday 8am to 6pm and Saturday 9am to 4pm. We are an independent appliance repair company, and sealed-system work is run by an EPA Section 608 certified technician as federal law requires.
$80 flat diagnostic, credited toward the repair on approval, written estimate before any part is ordered, genuine OEM parts, 90 days on labor, 365 days on parts.
Every call we take in The Jacksonville Beaches is a built-in kitchen appliance: built-in refrigeration , ice machines , dishwashers , wall ovens and ranges and cooktops and ventilation . Refrigeration, ice, dishwashing, baking, cooking and the hood over it — six things a kitchen does, and the machines that do them.
We do not work on heating, air conditioning, ductwork or heat pumps. That is a separate trade with a separate licence, and no amount of overlap in the vocabulary changes it: a condenser in a refrigerator and a condenser in an air handler are not the same machine, and we only open one of them. We do not take laundry calls either. If the fault is in your furnace, your air handler or the ducts, a licensed HVAC contractor is who you want — we would rather say that now than at your kitchen door.
One fee to find out: $80, flat, and it comes off the bill the moment you say go ahead. Past that, repair work in The Jacksonville Beaches sits between $240 and $2,520, and where inside that band a job lands is decided by the part that failed rather than by the badge on the door.
One table for the whole service area. What changes between addresses is which of these rows comes up, not what the row costs.
| Repair | Parts and labor |
|---|---|
| Diagnostic visit, flat | $80 |
| Compressor or sealed-system repair | $930–$2,520 |
| Door gasket or seal replacement | $240–$600 |
| Evaporator or condenser fan motor | $280–$600 |
| Ice maker, water valve or supply line | $240–$670 |
You get a written estimate before any part is ordered or any labor begins. Nothing proceeds without your approval.
Yes — Duval County, including Jacksonville Beach, South Jacksonville Beach, Isle of Palms, Atlantic Beach. Roughly a 40-mile working radius from the Jacksonville core. Appointments are scheduled, Mon–Fri 8–6 · Sat 9–4.
$80 to come out and find the fault, credited back the moment the repair is approved. The work itself lands between $240 and $2,520 on this kind of equipment — $930–$2,520 for compressor or sealed-system repair, $240–$670 for ice maker, water valve or supply line — and which of those it turns out to be is the thing the visit settles. Your own number goes in writing before a part is ordered.
The model and serial number off the data plate, the address, and what the appliance is actually doing rather than what you think has broken. The serial matters more than the model: built-in equipment is revised mid-production, and it often decides which board, gasket or motor is the correct one.
Rated 4.6 out of 5 across 101 customer reviews. Every entry below is one appointment, written up afterwards by the householder whose kitchen it happened in.
Filed under this region, so these are jobs that happened at addresses here.
The outdoor kitchen unit filled and then did nothing. Harvest thermostat had drifted and the drain was silted up with salt and sand. He replaced the one part, flushed the line and it has cycled properly ever since.
Wilhelmina O.2026-07-16
The hood blower had gone rough and the light circuit was flickering with it. He replaced the blower motor and the corroded lamp sockets, then resealed the roof cap where rain had been getting into the duct.
Merrick F.2026-04-28
The steam oven was leaving the cavity wet and venting moisture into the cabinet above. He replaced the seal and cleared the condensate path, then explained how to leave the door after a cycle in a house this humid.
Xenia B.2026-01-13
You get a written estimate before any part is ordered or any labor begins. Nothing proceeds without your approval.
Next door on the map: appliance repair in Jacksonville , Ponte Vedra Beach and Nocatee , St. Augustine and St. Johns and appliance repair in Orange Park and Fleming Island .